FLIP CAGE INSTALL INSTRUCTIONS

CÓMO INSTALAR EL
FLIP CAGES

FLIP Cages are built to carry up to 9.9lbs (4.5kg) of weight on each cage, but many fork eyelets are NOT capable of carrying that much weight! Check your frame manufacturer’s weight limit and adhere to the lowest rating. Alternatively you can mount FLIP Cages to our Axle Pack o Elkhorn rack to utilize the full weight capacity.

HERRAMIENTAS NECESARIAS:

      • 3mm hex
      • 4mm hex
      • Llave dinamométrica

No te olvides Grasa de montaje (preferiblemente) o normal. Te ayudará a que no se suelden los tornillos con el tiempo, el agua y la suciedad.

PASO 1: MOUNT THE FLIP CAGES

  • FLIP Cages come with an optional cargo foot. If you are only using FLIP Cages with a FLIP compatible bag the foot is optional.
  • Install FLIP Cages using 3 bolts torqued to 3nm.
    • If your bike only has 2 eyelets you will need to use a rack or 3-pack adapter like our Axle Pack o Elkhorn.

APUNTE: Some forks have eyelets with recessed threads. Be sure that the bolts thread in for a minimum of three full turns of engagement.

Installing FLiP Cages

 

 

PASO 2: ATTACH FLIP COMPATIBLE BAGS.

  • Tilt the bag and engage the lower hooks as shown in the image below. Make sure both hooks are fulling engaged in the cage.


  • Tip the bag up with the Latch Handle in the vertical position.

  • Rotate the handle 90 degrees to reach the locked position. The handle is designed to be rotated either direction for ease of use.
  • Check to ensure the bag clears the wheels spokes, or brakes by a minimum of 2″.

Installing FLiP Cages

The image above shows the bags too close to the tire.

Installing FLiP Cages

The image above shows the bags mounted with plenty of clearance.

PASO 3: COMPROBACIÓN FINAL Y APRIETE DE TORNILLOS

Check that all hardware is torqued to 3nm.

Revisa siempre toda la tornillería antes de cada salida.

¡ENHORABUENA!

ESTÁS LIST@ PARA UNA BUENA SALIDA EN BICI

PROBLEMAS

¿Tienes una bici que es una pensadora independiente, imposible de conformarse con las normas de la industria? ¡No te preocupes! Nuestros porta bultos son absolutamente adaptables y nosotros tenemos todos los trucos imaginables para montarlos.

Para cualquier problema de montaje envíanos un e-mail a [email protected]. Lo más seguro es que tengamos una solución para tu bici que te enviaremos rápidamente.