• 12mm rear axle for mounting a bike cargo rack
    View Cart
    Add to cart / Details

    Rear Fit Kit – SET806

    $82.00

    Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.

    • Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
    • Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
    • Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
  • Front axle for mountain bike forks
    View Cart
    Add to cart / Details

    Front Fit Kit – SET702

    $80.00

    Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.

    • Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
    • Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
    • Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
  • Suntour Q-loc compatible cargo axle
    View Cart
    Add to cart / Details

    Front Fit Kit – SET720

    $82.00

    Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.

    • Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
    • Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
    • Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
  • OMM-rear-non-fat-with-2-spacers
    View Cart
    Add to cart / Details

    12 mm Rear Thru Axle: 1.0 mm Thread Pitch and 172, 167, 160 mm Length

    $65.00
    This thru axle is for attaching an Old Man Mountain rack to the rear of your bike that has a 12 mm thru axle with 1.0 mm thread pitch and 172 mm, 167 mm or 160 mm length. We partner with The Robert Axle Project to supply our thru axles.
    • Diameter of thru axle is 12 mm.
    • Thread pitch is 1.0 mm.
    • True length of axle is 172 mm, but can be shortened to 167 mm? or 160 mm with the included spacers.
  • Suntour QLoc axle for cargo rack
    View Cart
    Add to cart / Details

    Front Thru Axle: SunTour Q-Loc Compatible

    $80.00
    This thru axle is for attaching an Old Man Mountain rack to the front of your mountain bike that has a SunTour Q-Loc thru axle. We partner with The Robert Axle Project to supply our thru axles.
  • Front axle for mountain bike forks
    View Cart
    Add to cart / Details

    Front Thru Axle For Boost Rockshox Forks: M15 x 1.5 mm Thread Pitch and 158 length

    $60.00
    This thru axle is allows you to attach a rack to a Rockshox fork. We partner with The Robert Axle Project to supply our thru axles.
    • Works with BOOST Rockshox forks.
    • M15 x 1.5 mm.
    • Diameter of thru axle is 15 mm.
    • Thread pitch is 1.5 mm.
    • Length is 158 mm.
  • View Cart
    Details

    Front Fit Kit 715

    $120.00
    Fit Kit #715 is for mounting an Old Man Mountain Fat Sherpa to the front of a fat bike with a 15 mm thru axle. 
    • Thru Axle: 15 mm thru axle with 198 mm length and M15 x 1.5 mm thread pitch.
    • Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all fat bike tire sizes.
    • Pair of 6" Extenders. Stabilize the rack to the fork.
    • Pair of OMM Pucks. Mount to the fork to provide an upper attachment point for the rack.
    • Stainless steel mounting hardware.
  • 12mm front axle for mounting a rack on a road or gravel fork
    View Cart
    Add to cart / Details

    Front Fit Kit – SET723.R

    $80.00

    Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.

    • Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
    • Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
    • Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
  • OMM Fit Kits for Rear Road bikes
    View Cart
    Details

    Rear Fit Kit 817.R

    $120.00
    Fit Kit #817.R is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
    • Thru Axle: 12 mm thru axle with 154, 160, or 167 mm length and 1.0 mm thread pitch.
    • Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all road/gravel/cross wheel sizes.
    • Pair of 14" extenders. Stabilize and level the rack.
    • A 27.2 diameter seatpost mount. Allows for an upper attachment point for the rack.
    • Stainless steel mounting hardware.
  • Front axle for mountain bike forks
    View Cart
    Add to cart / Details

    Front Fit Kit – SET724.X

    $82.00

    Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.

    • Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
    • Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
    • Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
  • OMM-rear-non-fat-with-flat-6mm-spacer
    View Cart
    Add to cart / Details

    12 mm Rear Thru Axle: 1.75 mm Thread Pitch and 167-174 mm Length

    $65.00
    This thru axle is for attaching an Old Man Mountain rack to the rear of a bike that has a 12 mm thru axle with 1.75 mm thread pitch and 174 or 167 mm length with included spacers. We partner with The Robert Axle Project to supply our thru axles.
    • Diameter of thru axle is 12 mm.
    • Thread pitch is 1.75 mm.
    • True length of axle is 174 mm, but can be shortened to 167 mm with the included spacers.
  • OMM-rear-non-fat-with-2-spacers
    View Cart
    Add to cart / Details

    12 mm Rear Thru Axle: 1.0 mm Thread Pitch and 184 or 175 mm Length

    $65.00
    This thru axle is for attaching an Old Man Mountain rack to the rear of your bike that has a 12 mm thru axle with 1.0 mm thread pitch and 184 mm or 175 mm length using the included spacer. We partner with The Robert Axle Project to supply our thru axles.
    • Diameter of thru axle is 12 mm.
    • Thread pitch is 1.0 mm.
    • True length of axle is 184 mm, but can be shortened to 175 mm with the included spacer.
  • OMM-rear-non-fat-with-flat-6mm-spacer
    View Cart
    Add to cart / Details

    12 mm Rear Thru Axle: 1.5 mm Thread Pitch and 159 or 165 mm Length

    $65.00
    This thru axle is for attaching an Old Man Mountain rack to the rear of a bike that has a 12 mm thru axle with 1.5 mm thread pitch and 165 mm or 159 mm length. We partner with The Robert Axle Project to supply our thru axles.
    • Diameter of thru axle is 12 mm.
    • Thread pitch is 1.5 mm.
    • True length of axle is 165 mm, but can be shortened to 159 mm with the included spacer.
  • View Cart
    Details

    Front Fit Kit 704

    $120.00
    Fit Kit #704 is for mounting an Old Man Mountain Sherpa to a fork with a 15 mm thru axle.
    • Thru Axle: 15 mm thru axle with 155 mm length and M14 x 1.5 mm thread pitch.
    • Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all fat bike tire sizes.
    • Pair of 6" extenders. Stabilize and level the rack.
    • Pair of OMM Pucks. Mount to the fork to provide an upper attachment point for the rack.
    • Stainless steel mounting hardware.
  • Front axle for mountain bike forks
    View Cart
    Add to cart / Details

    15 mm Front Thru Axle: 1.5 mm Thread Pitch and 148 mm Length

    $60.00
    This thru axle is for attaching an Old Man Mountain front rack to your mountain bike that has a 15 mm thru axle with a length of 148 mm. It fits all Rockshox forks (both standard and Boost.) We partner with The Robert Axle Project to supply our thru axles.
    • Diameter of thru axle is 15 mm.
    • Thread pitch is 1.5 mm.
    • Length is 148 mm.
  • View Cart
    Details

    Front Fit Kit 720

    $142.00
    Fit Kit #720 is for mounting an Old Man Mountain Sherpa to a fork with a 15 mm thru axle.
    • Thru Axle: SunTour Q-Loc compatible axle.
    • Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all fat bike tire sizes.
    • Pair of 6" extenders. Stabilize and level the rack.
    • Pair of OMM Pucks. Mount to the fork to provide an upper attachment point for the rack.
    • Stainless steel mounting hardware.
  • Fit Kit small parts for mounting a bike rack on a mountain bike
    View Cart
    Add to cart / Details

    Front Fit Kit – SET725

    $82.00

    Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.

    • Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
    • Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
    • Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
  • View Cart
    Add to cart / Details

    12 mm Front Thru Axle: 1.0 mm Thread Pitch and 119-125 mm Length

    $60.00
    This thru axle is for attaching an Old Man Mountain rack to the front of your road or gravel bike that has a 12 mm thru axle with a 1.0mm thread pitch and a length of 119 or 125mm. We partner with The Robert Axle Project to supply our thru axles.
    • Diameter of thru axle is 12 mm.
    • Thread pitch is 1.0 mm.
    • Length is 119 or 125 mm with included 6 mm tapered spacer.

Title

© Old Man Mountain // All Rights Reserved // Bike Racks // 2022 // W

We Ship Worldwide. Supporting You Wherever Adventure Takes You!

Learn More
X