• This thru axle is for attaching an Old Man Mountain rack to the rear of your bike that has a 12 mm thru axle with 1.0 mm thread pitch and 172 mm, 167 mm or 160 mm length. We partner with The Robert Axle Project to supply our thru axles.
    • Diameter of thru axle is 12 mm.
    • Thread pitch is 1.0 mm.
    • True length of axle is 172 mm, but can be shortened to 167 mm? or 160 mm with the included spacers.
  • Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.

    • Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
    • Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
    • Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
  • This thru axle is for attaching an Old Man Mountain rack to the rear of a bike that has a 12 mm thru axle with 1.75 mm thread pitch and 180 mm or 174 mm length. We partner with The Robert Axle Project to supply our thru axles.
    • Diameter of thru axle is 12 mm.
    • Thread pitch is 1.75 mm.
    • True length of axle is 180 mm, but can be shortened to 174 mm with the included spacer.
  • Fit Kit #814.R is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
    • Thru Axle: 12 mm thru axle with 172 or 178 mm length and x 1.5 mm thread pitch.
    • Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all road/gravel/cross wheel sizes.
    • Pair of 14" extenders. Stabilize and level the rack.
    • A 27.2 diameter seatpost mount. Allows for an upper attachment point for the rack.
    • Stainless steel mounting hardware.
  • This thru axle is for attaching a rack to the rear of a bike that has a 12 mm thru axle with 1.5 mm thread pitch and 178 mm or 172 mm length. We partner with The Robert Axle Project to supply our thru axles.
    • Diameter of thru axle is 12 mm.
    • Thread pitch is 1.5 mm.
    • True length of axle is 178 mm, but can be shortened to 172 mm with the included spacer.
    • Includes hardware for attaching the rack.
  • Fit Kit #801.R is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
    • Thru Axle: 12 mm thru axle with 167 or 174 mm length and x 1.75 mm thread pitch.
    • Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all fat bike tire sizes.
    • Pair of 14" extenders. Stabilize and level the rack.
    • A 27.2 diameter seatpost mount. Allows for an upper attachment point for the rack.
    • Stainless steel mounting hardware.
  • Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.

    • Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
    • Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
    • Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
  • Fit Kit #812.R is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
    • Thru Axle: 12 mm thru axle with 159 or 165 mm length and x 1.5 mm thread pitch.
    • Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all road/gravel/cross wheel sizes.
    • Pair of 14" extenders. Stabilize and level the rack.
    • A 27.2 diameter seatpost mount. Allows for an upper attachment point for the rack.
    • Stainless steel mounting hardware.
  • Fit Kit #810 is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
    • Thru Axle: 12 mm thru axle with 192 or 198 mm length and x 1.75 mm thread pitch.
    • Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all road/gravel/cross wheel sizes.
    • Pair of 14" extenders. Stabilize and level the rack.
    • Pair of OMM Pucks. Allows for an upper attachment point for the rack.
    • Stainless steel mounting hardware.
  • Fit Kit #813.R is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
    • Thru Axle: 12 mm thru axle with 160, 167 or 172 mm length and x 1.0 mm thread pitch.
    • Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all road/gravel/cross wheel sizes.
    • Pair of 14" extenders. Stabilize and level the rack.
    • A 27.2 diameter seatpost mount. Allows for an upper attachment point for the rack.
    • Stainless steel mounting hardware.
  • Fit Kit #815 is for mounting an Old Man Mountain Fat Sherpa to the rear of a fat bike.
    • Thru Axle: 12 mm thru axle with 217 to 229 mm length and x 1.0 mm thread pitch.
    • Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all fat bike tire sizes.
    • Pair of 14" extenders. Stabilize and level the rack.
    • Pair of OMM Pucks. Mount to seatstays to provide an upper attachment point for the rack.
    • Stainless steel mounting hardware.
  • Fit Kit #826 is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
    • Thru Axle: 12 mm thru axle with 175 to 184 mm length and x 1.0 mm thread pitch.
    • Pair of 5" Dropouts. Attach the rack frame to thru axle. Fits all wheel sizes with tire width 3 inches or under.
    • Pair of 14" extenders. Stabilize and level the rack.
    • Pair of OMM Pucks. Allows for an upper attachment point for the rack.
    • Stainless steel mounting hardware.
  • Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
    • Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
    • Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
    • Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts. 
  • Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.

    • Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
    • Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
    • Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
  • Fit Kit 808 is for mounting an Old Man Mountain Fat Sherpa to the rear of a fat bike.
    • Thru Axle: 12 mm thru axle with 223 to 229 mm length and x 1.5 mm thread pitch.
    • Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all fat bike tire sizes.
    • Pair of 14" extenders. Stabilize and level the rack.
    • Pair of OMM Pucks. Mount to the seatstays to provide an upper attachment point for the rack.
    • Stainless steel mounting hardware.
  • Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.

    • Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
    • Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
    • Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
  • This Fit Kit contains all the parts to mount the rack to the rear of a bike with a 10 x 135 mm hub skewer: 10 x 135 mm QR Skewer, pair of 5" dropouts, pair of 14" extenders, pair of pucks, clear protective tape, and all mounting hardware.
  • Fit Kit 814 is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
    • Thru Axle: 12 mm thru axle with 172 or 178 mm length and x 1.5 mm thread pitch.
    • Pair of 5" Dropouts. Attach the rack frame to thru axle. Fits all wheel sizes with tire width 3 inches or under.
    • Pair of 14" extenders. Stabilize and level the rack.
    • Pair of OMM Pucks. Allows for an upper attachment point for the rack.
    • Stainless steel mounting hardware.

Title