Premium screen printed 100% cotton tee.
-
When you need the extra space that rack bags provide, but need something that will not get in your way when the going gets strange, Nano Panniers are the ticket! These bags were designed around Old Man Mountain racks, making them a perfect fit. Designed to carry dense and heavy stuff like food, water and fuel in a low profile form. For shorter riders who need to run a rack due to limited carrying space elsewhere, these bags are your new best friend.
At only 4" wide the load stays tight to the bike on singletrack and will not get in your way on those nasty hike-a-bikes. An external compression system keeps the bag snug at various load levels.
The devil is in the details on our rack attachment system. Although simple in concept, the tight spacing between the aluminum loop and strap prevents slop at the pannier rails. A bomber Voile nano strap with metal hardware provides tension at the bottom and gives versatility in mounting.
Fiberglass stiffened high density foam frame sheet gives the bag internal structure and works with the external compression system to transfer load to the rack.
Made with 200 denier UHMWPE / Polyester woven laminated fabric, the Nanos have a minimum of seams for durability and water resistance, plus double taped lower seams.
-
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
-
This Fit Kit contains all the parts to mount an Old Man Mountain rack to the rear of a bike with a 10 x 190 mm hub skewer: A QR Skewer, a pair of pucks, and clear protective tape.
-
Fit Kit #826 is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
- Thru Axle: 12 mm thru axle with 175 to 184 mm length and x 1.0 mm thread pitch.
- Pair of 5" Dropouts. Attach the rack frame to thru axle. Fits all wheel sizes with tire width 3 inches or under.
- Pair of 14" extenders. Stabilize and level the rack.
- Pair of OMM Pucks. Allows for an upper attachment point for the rack.
- Stainless steel mounting hardware.
-
Fit Kit #817.R is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
- Thru Axle: 12 mm thru axle with 154, 160, or 167 mm length and 1.0 mm thread pitch.
- Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all road/gravel/cross wheel sizes.
- Pair of 14" extenders. Stabilize and level the rack.
- A 27.2 diameter seatpost mount. Allows for an upper attachment point for the rack.
- Stainless steel mounting hardware.
-
Fit Kit #815 is for mounting an Old Man Mountain Fat Sherpa to the rear of a fat bike.
- Thru Axle: 12 mm thru axle with 217 to 229 mm length and x 1.0 mm thread pitch.
- Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all fat bike tire sizes.
- Pair of 14" extenders. Stabilize and level the rack.
- Pair of OMM Pucks. Mount to seatstays to provide an upper attachment point for the rack.
- Stainless steel mounting hardware.
-
Fit Kit #814.R is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
- Thru Axle: 12 mm thru axle with 172 or 178 mm length and x 1.5 mm thread pitch.
- Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all road/gravel/cross wheel sizes.
- Pair of 14" extenders. Stabilize and level the rack.
- A 27.2 diameter seatpost mount. Allows for an upper attachment point for the rack.
- Stainless steel mounting hardware.
-
Fit Kit 814 is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
- Thru Axle: 12 mm thru axle with 172 or 178 mm length and x 1.5 mm thread pitch.
- Pair of 5" Dropouts. Attach the rack frame to thru axle. Fits all wheel sizes with tire width 3 inches or under.
- Pair of 14" extenders. Stabilize and level the rack.
- Pair of OMM Pucks. Allows for an upper attachment point for the rack.
- Stainless steel mounting hardware.
-
Fit Kit #813.R is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
- Thru Axle: 12 mm thru axle with 160, 167 or 172 mm length and x 1.0 mm thread pitch.
- Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all road/gravel/cross wheel sizes.
- Pair of 14" extenders. Stabilize and level the rack.
- A 27.2 diameter seatpost mount. Allows for an upper attachment point for the rack.
- Stainless steel mounting hardware.
-
Fit Kit #813 is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
- Thru Axle: 12 mm thru axle with 160, 167 or 172 mm length and x 1.0 mm thread pitch.
- Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all wheel sizes with tires width 3 inches or under.
- Pair of 14" extenders. Stabilize and level the rack.
- Pair of OMM Pucks. Allows for an upper attachment point for the rack.
- Stainless steel mounting hardware.
-
Fit Kit #812.R is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
- Thru Axle: 12 mm thru axle with 159 or 165 mm length and x 1.5 mm thread pitch.
- Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all road/gravel/cross wheel sizes.
- Pair of 14" extenders. Stabilize and level the rack.
- A 27.2 diameter seatpost mount. Allows for an upper attachment point for the rack.
- Stainless steel mounting hardware.
