-
This 5mm Quick Release Skewer is for mounting a rack any QR bike and can be cut to length.
-
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
-
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
-
Old Man Mountain Axle Pack is unlike any fork mount adapter you've seen. Rather than trying to clamp to round or tapered surfaces and just hope it doesn't slip or spin, Axle Pack is, you guessed it: Thru Axle mounted! Attaching to the axle makes it impossible to slip or spin. Axle Pack is lightweight, reliable, robust, and rigid. With four mounting points you can also choose to run your gear higher or lower depending on your needs. Mounted to one of our Fit Kits, Axle pack is also easily swappable with any of our racks so you can pack the right gear for the ride. Have a carbon road bike? Perfect! Suspension fork? Perfect! Aluminum bike but you don't trust the rivnuts? We've got it! Long story short, if you have a thru axle fork, we have an Axle Pack ready for you. Axle Pack mounts to our Thru Axle Fit Kits. After you add the Axle Pack to your cart you can use this Fit Finder to get the correct Fit Kit.
-
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
-
SOLD AS A PAIR.
Old Man Mountain Axle Pack is unlike any fork mount adapter you've seen. Rather than trying to clamp to round or tapered surfaces and just hope it doesn't slip or spin, Axle Pack is, you guessed it: Thru Axle mounted! Attaching to the axle makes it impossible to slip or spin. Axle Pack is lightweight, reliable, robust, and rigid. With four mounting points you can also choose to run your gear higher or lower depending on your needs. Mounted to one of our Fit Kits, Axle pack is also easily swappable with any of our racks so you can pack the right gear for the ride. Have a carbon road bike? Perfect! Suspension fork? Perfect! Aluminum bike but you don't trust the rivnuts? We've got it! Long story short, if you have a thru axle fork, we have an Axle Pack ready for you. Axle Pack is designed to be mounted to our Thru Axle Fit Kits. After you add the Axle Pack to your cart you can use this Fit Finder to get the correct Thru Axle Fit Kit. (Not compatible with QR skewers) -
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
-
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
-
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
-
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
-
This thru axle is for attaching an Old Man Mountain rack to the rear of a bike that has a 12 mm thru axle with 1.75 mm thread pitch and 174 or 167 mm length with included spacers. We partner with The Robert Axle Project to supply our thru axles.
- Diameter of thru axle is 12 mm.
- Thread pitch is 1.5 mm.
- True length of axle is 188 mm, but can be shortened to 176 mm with the included spacers.
-
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
-
Where are you going? Absolutely anywhere with the Juniper Trunk. This Bikepacking trunk bag is ready for everything. Sunshine or rain, your gear will stay dry and protected in this 100% waterproof TPU fabric trunk with welded seams and Hypalon reinforcements. We've secured the Trunk to your rack deck with four cam lock strapped buckles to keep it steady and secure. Our branding is super subtle so you can focus on your adventure and not our logos. It's embosses into loop velcro so you can attach any patch with ease and swap it out as your mood suits you.
-
ON BACKORDER. Expected May 20th. A-tisket, A-tasket, An Aluminum Bike Basket. Powder coated black, rugged, and still lighter than the alternatives. The OMM Basket Can't Be Beat! We built this basket to bolt directly to our racks for a stable and rattle-free ride. The basket pattern is Molle compatible so you can attach your favorite accessory pouches. Are you into basket bags? We've made our basket compatible with all "137" basket bags. Whether you're basket packing with some primo snacks in reach or commuting around town, you'll fall in love with this basket.
-
The Pizza Rack is ready to make those wide, awkward carries a breeze, and is perfect for commuting or bikepacking while keeping your gear within reach. Great for a Basket, Caradice bag, Porteur Bag or just, a bunch of bungees. With a Heavy Duty version of the Elkhorn uprights, and a 10" x 12.9" deck the Pizza Rack can comfortably carry up to 35lbs of gear. The solid center deck provides more tie-down points than you could ever need, keeps your gear out of your tire, and doubles as a fender! The Pizza Rack come with everything you need to Eyelet mount the rack on the front of your bike. If you don't have eyelets, Old Man Mountain racks are the most versatile racks available. Our Fit Kits are capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, even tri-bikes if that's what you're into. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need.
-
This thru axle is allows you to attach a rack to a thru axle fork. We partner with The Robert Axle Project to supply our thru axles.
- 12 x 134 mm thru axle with M12 x 1.5 mm thread pitch
- Diameter of thru axle is 12 mm.
- Thread pitch is 1.5 mm.
- Length is 134mm.
- Axle shaft is precision machined from 7075 aluminum.
- Anodized for rugged durability.
-
This thru axle is for attaching an Old Man Mountain rack to the front of your fat bike that has a 15 mm thru axle with 1.5 mm thread pitch and 135 mm length. We partner with The Robert Axle Project to supply our made in the USA axles.
- Diameter of thru axle is 15 mm.
- Thread pitch is M15 x 1.5 mm.
- Length is 135 mm.
-
This dropout replaces the non-driveside dropout on your Divide rack frame and allows you to use a kid trailer hitch and rack at the same time.
