-
Old Man Mountain Axle Pack is unlike any fork mount adapter you've seen. Rather than trying to clamp to round or tapered surfaces and just hope it doesn't slip or spin, Axle Pack is, you guessed it: Thru Axle mounted! Attaching to the axle makes it impossible to slip or spin. Axle Pack is lightweight, reliable, robust, and rigid. With four mounting points you can also choose to run your gear higher or lower depending on your needs. Mounted to one of our Fit Kits, Axle pack is also easily swappable with any of our racks so you can pack the right gear for the ride. Have a carbon road bike? Perfect! Suspension fork? Perfect! Aluminum bike but you don't trust the rivnuts? We've got it! Long story short, if you have a thru axle fork, we have an Axle Pack ready for you. Axle Pack mounts to our Thru Axle Fit Kits. After you add the Axle Pack to your cart you can use this Fit Finder to get the correct Fit Kit.
-
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
-
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
-
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
-
Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, even tri-bikes if that's what you're in to. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need.
-
The Made in USA versions of our racks are made in California by the company's founder, Channing Hammond. While made to nearly the same design as our other racks, they retain our Classic logo embossed on the deck, and you now know the name of the guy that makes them. Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, even tri-bikes if that's what you're in to. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need.
-
This pair of drop outs attach the Divide rack frames to your bike. The asymmetrical design allows for eyelet mounting or attachment to Robert Axle Project thru axles.
-
Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, even tri-bikes if that's what you're in to. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need.
-
The Made in USA versions of our racks are made in California by the company's founder, Channing Hammond. While made to nearly the same design as our other racks, they retain our Classic logo embossed on the deck, and you now know the name of the guy that makes them. Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, even tri-bikes if that's what you're in to. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need.
-
- The Short fits tires up to 27.5 x 2.8″ or 700c x 50mm.
- The Tall is for maximum mud clearance and fits tires up to 29 x 3.25″.
The Elkhorn is a slender multi-tool of a rack. Stable and secure with 3-pack mounts on the uprights for your favorite cargo or bottle cages and more tie-down points on the deck than you could ever need. Front or rear compatible, the Elkhorn lets you feel the trail beneath you rather than the tail wag behind you.
Old Man Mountain racks are the most versatile racks available. Capable of mounting to suspension forks, full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, even tri-bikes if that's what you're into.
Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter, cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you?
Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need.
-
This Fit Kit contains all the parts to mount an Old Man Mountain rack to the front of a fat bike with a 9 x 135 Quick Release Skewer: 9 x 100 QR Skewer, pair of 5" dropouts, pair of 6" extenders, pair of pucks, clear protective tape, and all mounting hardware
-
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.
