- Thru Axle: 12 mm thru axle with 217 to 229 mm length and x 1.75 mm thread pitch.
- Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all fat bike tire sizes.
- Pair of 14" extenders. Stabilize and level the rack.
- Pair of OMM Pucks. Mount to the fork to provide an upper attachment point for the rack.
- Stainless steel mounting hardware.
-
Fit Kit #807 is for mounting an Old Man Mountain Fat Sherpa to the rear of a fat bike.
-
This 5 mm Quick Release Skewer is for mounting a rack to a bike with a 10 x 135 mm hub standard.
-
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
-
When you need the extra space that rack bags provide, but need something that will not get in your way when the going gets strange, Nano Panniers are the ticket! These bags were designed around Old Man Mountain racks, making them a perfect fit. Designed to carry dense and heavy stuff like food, water and fuel in a low profile form. For shorter riders who need to run a rack due to limited carrying space elsewhere, these bags are your new best friend.
At only 4" wide the load stays tight to the bike on singletrack and will not get in your way on those nasty hike-a-bikes. An external compression system keeps the bag snug at various load levels.
The devil is in the details on our rack attachment system. Although simple in concept, the tight spacing between the aluminum loop and strap prevents slop at the pannier rails. A bomber Voile nano strap with metal hardware provides tension at the bottom and gives versatility in mounting.
Fiberglass stiffened high density foam frame sheet gives the bag internal structure and works with the external compression system to transfer load to the rack.
Made with 200 denier UHMWPE / Polyester woven laminated fabric, the Nanos have a minimum of seams for durability and water resistance, plus double taped lower seams.
-
Fit Kit 814 is for mounting an Old Man Mountain Sherpa Classic on to the rear of a bike with a 12 mm thru axle.
- Thru Axle: 12 mm thru axle with 172 or 178 mm length and x 1.5 mm thread pitch.
- Pair of 5" Dropouts. Attach the rack frame to thru axle. Fits all wheel sizes with tire width 3 inches or under.
- Pair of 14" extenders. Stabilize and level the rack.
- Pair of OMM Pucks. Allows for an upper attachment point for the rack.
- Stainless steel mounting hardware.
-
This Fit Kit contains all the parts to mount the rack to the rear of a bike with a 10 x 135 mm hub skewer: 10 x 135 mm QR Skewer, pair of 5" dropouts, pair of 14" extenders, pair of pucks, clear protective tape, and all mounting hardware.
-
Pair of 5 inch rear drop outs attach the rack frame to the thru axle in your rear wheel. The asymmetrical design is specific to allow attachment to Robert Axle thru axles. Includes hook for attaching the lower part of your panniers. These dropouts are for all mountain and fat bikes with:
- 27.5 inch wheels
- 27.5 inch Plus wheels
- 29 inch wheels
- 29 inch Plus wheels
- Fat bike wheels (26 inch) with up to 5 inch wide tires.
-
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
-
Tried, true, and simple dry bags are an essential piece of bikepacking kit. We've tested a bunch and these Sea to Summit Big River dry bags strike the perfect balance of lightweight and durable. The 5 Liter are perfect for cargo cages and the 8 Liter bags match our racks decks perfectly. Big River Dry Bags use a durable and abrasion resistant 420D nylon fabric. The white interior grants greater visibility, and lash loops provide plenty of confidence. The hypalon non-wicking roll-top closure keeps water out, and the Field Repair Buckles can be replaced in seconds with just a Philips screwdriver. It also was designed with an oval base to save space when packing and prevent it from rolling away.
-
On some rides you can feel the mountain breathing. Rhythmic gusts of wind pushing against you or, if he’s feeling forgiving, pushing at your back. He’s a craggy, weathered old man, worn by time and the elements, but rest here for a moment and breath in the wisdom of the mountain air. The long sleeve runs a full size small so please order a size larger than you normally would.
-
Fit Kit 808 is for mounting an Old Man Mountain Fat Sherpa to the rear of a fat bike.
- Thru Axle: 12 mm thru axle with 223 to 229 mm length and x 1.5 mm thread pitch.
- Pair of 5" Dropouts. Attach the rack frame to thru axle to fit all fat bike tire sizes.
- Pair of 14" extenders. Stabilize and level the rack.
- Pair of OMM Pucks. Mount to the seatstays to provide an upper attachment point for the rack.
- Stainless steel mounting hardware.
-
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
-
If your bike has eyelet mounts on the front or rear dropouts, this kit will fit your bike. Keep in mind our racks are rated to 70 lbs only when mounted to the thru axle. Eyelet kits are rated to 45 lbs, which should be more than enough for most adventures, but does not take full advantage of the carry capacity of our racks when mounted to our thru axles.
-
Earn your Loam and Gravel Society Merit Badges, and display your achievements with this three patch set. Take a friend out riding to earn the Enabler badge. Head to the local river or stream to earn your Bikefishing badge. And spend a night sleeping under the stars by bike to earn your Overnighter badge. All patches have an iron on backing and are made by Falls Creek Outfitters.
-
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.?
-
These pucks attach the Old Man Mountain rack frame to your road, gravel or cross bike fork. They provide a secure upper attachment point for the front rack. Included in the packet are heavy duty zip ties, clear protective film, and mounting hardware. Designed for use with carbon, steel, titanium and aluminum forks. Slots in the puck also allow for use with metal hose clamps (not intended for carbon forks). Pucks can be left on the bike for future reinstallation of the rack.
-
The Made in USA versions of our racks are made in California by the company's founder, Channing Hammond. While made to nearly the same design as our other racks, they retain our Classic logo embossed on the deck, and you now know the name of the guy that makes them. Old Man Mountain racks are the most versatile racks available. Capable of mounting to full-suspension mountain bikes, gravel bikes, road bikes, fat bikes, even tri-bikes if that's what you're in to. Tested and trusted in the most extreme environments on earth (we're still trying to get NASA to take them to the moon). Our racks have helped riders traverse Iceland in bitter cold winters, carried the gear of countless GDMBR riders, and circumnavigated the globe. The only remaining question is where will it go with you? Want to use our rack on a bike that isn't made for racks? Want to swap your rack between multiple bikes? A Fit Kit is all you need.
-
Our Fit Kits are tried and tested! Old Man Mountain was born in 1996 from the need to mount racks on bikes without traditional mounting points and make every bike capable of doing more. Our Fit Kits do just that while having some key benefits over eyelet mounting too.
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame by moving the load from a small bolt that's loaded in shear to a stud that extends from the axle and is captured by the rack dropouts.
- Need to carry more gear? Axle mounting increases our Divide rack's load capacity to 70lbs/33kg.
- Want to move your rack between multiple bikes? Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts.
